Corrugated Metal -- Creative Building Supply -- Custom Formed Metal Panels -- 4.2 Corrugated Perforated Metal Panels -- Custom Sheet Metal Fabrication -- FABRAL Metal Panels -- Aluminum Lagging Panels -- 5.33 Box Beam -- 4 7/8 V-Beam -- Reynorib -- Stucco Embossed Aluminum Lagging Panels -- 8" Rib Aluminum Panels | 2 1/2" Corrugated Metal Roofing | Document, Tabpane, Getelementbyid, Addtabpage, Shall

Newsflash

Custom Sheet Metal Fabrication, "Box Gutters & Flashings Formed to

20' Lengths." Custom Formed Panels" to" Match Almost Any Profile"

Home

Our Products

Industrial

2 1/2" Corrugated Metal Roofing

Description

An economical and versatile wall or roof panel. 2 1/2"x 1/2 Corrugated, exposed fastener panel. Panels shall be attached to the substrate with exposed screws stocked 27 1/2" wide G90 Galvanized, 26GA through 18GA 8' Long, 10' Long & 12' Long all gauges. 26GA & 18GA also stock 27 1/2" x 20' Long Special length orders 2-3 Weeks

Specifications

Minimum slope for roofing applications is 21/2:12
Panels can be curved
Standard lengths: 6'-45'

7/8" Corrugated Metal Roofing

Description

Corrugated, exposed fastener panel.

Specifications

A bolder look than our 1/2" corrugated
Great for exterior and interior uses
Minimum slope for roofing applications is 21/2:12
Panels can be curved
Standard lengths: 6'-45'
Can be perforated for acoustical applications

4.2 Corrugated Metal Panels

Description

Panel Size:	42" x 8'0"
	42" x 10'0"
	42" x 12'0"
Panel Width:	42" Wide
Panel Coverage :	37.8" Cover
Panel Depth	1 1/16 Deep
Materials:	Aluminum .032 - .125
	Stainless 24 - 18 GA
	G-90 GALV 24-16 GA
Finishes:	Smooth or Embossed
	Painted
	24 GA Galv
	Unpainted

Images

V-Beam Metal Roofing

Description

The V-Beam panel shall have a coverage of 32" for steel and 42" for aluminum. Rib height shall be 1¾". Panels shall be directly fastened to the substrate. The panel shall have a overlapping sidelap feature.

Specifications

Minimum slope for roofing applications is 2:12
Available in .040" and .050" aluminum
Excellent strength and spanning capability
Diaphragm capacity per ICBO Evaluation Report
Standard lengths: 6'-45'

4" Rib Metal Roofing

Description

An industry standard—Ideal for heavy industrial and lagging applications

Specifications

Available mill finish, clad or painted in .032", .040" and .050" aluminum
Available in 24, 22 & 20 gauge steel, 32" coverage
Panels can be curved
Minimum slope for steel roofing applications is 21/2:12
Standard lengths: 6'-45'
8" Rib available on an inquiry basis
The allowable loads are based on 1986 AISI and 1986 Aluminum Association specifications.
The allowable loads are based on stress only.
The allowable loads for the steel load table may be increased by 1/3 for wind loading. The allowable loads have been increased for the alumunim load tables by 1/3 for wind loading.
The use of steel 4" Rib panels on roof pitches less than 2 1/2":12 (12°) is not recommended.
The maximum individual panel length for steel 4" Rib on roofs in 32' due to thermal movement considerations.
The use of aluminum 4" Rib panels on roofs is not recommended.

Ultra Rib® Metal Roofing

Description

Ultra-Rib structural exposed fastener roof and wall system.

Specifications

26 gauge industrial quality steel or AZ50 (painted) and AZ50 (unpainted) coatings
Full 36" coverage
Purlin bearing leg
Minimum roof pitch 1:12
All orders custom cut to lengths up to 40'
Perfect for commercial and industrial applications
Aluminum available on an inquiry basis

Mighti-Rib PBR Metal Roofing

Description

The Mighti-Rib PBR panel shall have a coverage of 36". Panels shall be directly fastened to the substrate. The panel shall have an overlapping sidelap feature.

Specifications

Excellent for commercial and industrial applications
26 gauge full hard (80 ksi) steel
Diaphragm capacity per ICBO Evaluation Report
Standard lengths: 6'-45'
PBR panels require a minimum slope of 1:12
UL90 rating for PBR panels when attached to steel purlins
Available unpainted or finished with high-performance Super Alurite® paint system

Hefti-Rib Metal Roofing

Description

A classic design with 7.2" rib spacing. Excellent strength and spanning capability. Excellent for both wall and roof applications.

Specifications

Available in .032" and .040" aluminum
Available in 24, 22, 20 and 18 gauge steel
Panels can be curved
Minimum slope for roofing applications is 2:12
Standard lengths: 6'-45'
36" wide weather coverage
Diaphragm capacity per ICBO Evaluation Report

Fabrib Metal Roofing

Description

A 1/2" deep panel perfect for light-duty commercial applications
Anti-siphon drain channel prevents water wicking at side joints
Economical 48" wide coverage
Standard lengths: 6'-45'

Specifications

0.014" (linear), 0.019" and 0.021" Thickness
9/16" Rib height
48" Coverage
2.67" Pitch
Available in custom lengths up to 16'
Lengths greater than 16' are not recommended due to expansion and contraction

Deep Rib IV Metal Roofing

Description

A bold rib design, perfect for horizontal and vertical applications
Large 4" deep ribs provide excellent strength and spanning capacity
Can be used inverted for roof applications
Minimum roof slope: 1:12
Excellent for applications with large spans between structural framing members
Standard lengths: 6'-45'

Specifications

The Deep Rib IV panel shall have a coverage of 24". Rib height shall be 4".
Panels shall be directly fastened to the substrate.
The panel shall have a overlapping sidelap feature.

Deep Rib II Metal Roofing

Description

The Deep Rib II panel shall have a coverage of 30" for steel and 40" for aluminum". Rib height shall be 2". Panels shall be directly fastened to the substrate. The panel shall have a overlapping sidelap feature.