Many Profiles Formed in Perforated panels, Stainless Steel, Aluminum, and Steel. 4.2 Corrugated, 2 1/2 Corrugated, 7/8 Corrugated as well as many Ribbed panels. 7.2-Rib, 5.33 V-Beam, 4 7/8" V-beam, 4"-Rib, 5.33 Box-Beam, 7"-Rib, R-Panel, Deep Rib II,
Deep Rib IV, MR3-36, B-deck, Unlimited perforated hole sizes.
Panels: the Thin Seam panel shall have a 1¾" seam height, a maximum seam width of ", and a seam spacing of 12", 14", 16", or 18" wide. Roof panels shall use a two-piece roof clip allowing for thermal movement of the panel system. The standing seam shall have a built in capillary break with the option of a factory applied sealant in the female leg. Concealed one piece roof clip will engage the panel seal allowing for unlimited thermal movement. The standing seam shall snap lock together without the use of or need for an electric seaming device. Roof panels shall be removable for replacement of damaged materials during and after installation is completed. The panel system shall be as a true standing seam shape requiring no trapezoidal foam closures, plugs, or fillers at eaves.
Specifications
Standard widths available: 16" and 18"
Multiple UL90 ratings
Minimum roof slope: 1:12
Factory applied sealant is standard
Stiffening ribs or shadow lines available for different aesthetic requirements
Can be installed over open framing or solid substrates
Amp Lok Metal Roofing
Description
Amp Lok structural standing seam roof system as manufactured by Fabral, 3449 Hempland Road, Lancaster, PA 17601, ph.: 800-477-2741; fax: 800-283-4289.
The Amp Lok panel shall have a coverage of 12", 14", 16", or 18". Seams shall be 2" high. Roof panels shall use a two-piece roof clip allowing for thermal movement of the panel system. The panel shall have a factory-applied mastic and be mechanically seamed with a field operated electric seaming machine provided by the manufacturer. The panel system shall be as a true standing seam shape requiring no trapezoidal foam closures, plugs, or fillers at eaves. Panels have 1" shadowlines as a standard.
Specifications
Factory applied sealant is standard
Mechanical seaming ensures weather-tightness
2 piece clip allows for thermal movement
Standard widths: 16" and 18"
Minimum roof slope: 1:12
Shadow lines are standard
Multiple UL90 ratings
Can be factory or field curved - minimum 10 foot radius
Panels can be tapered
Can be installed over open framing or solid substrate
Allowable loads are based on 1980 edition of AISI specifications.
Deflection is limited to L/240 of span.
Loads are based on spans of 3 or more.
FY=50 ksi for steel panels.
Uplift values based on attachment to 16 ga purlins with 2 # 10-16x1" SD ST screws.
Double Lok Metal Roofing
Description
Panels: the Double Lock panel shall be formed as 1½" seam height with a seam spacing of 12", 16", or 20" on center. Roof panels shall use a two-piece roof clip allowing for thermal movement of the panel system. The panel shall be mechanically seamed with a field-operated, electric- seaming machine provided by the manufacturer. The panel system shall be as a true standing seam shape requiring no trapezoidal foam closures, plugs, or fillers at eaves. The maximum panel length shall be 40' (consult with factory for longer lengths). his panel shall be installed over a solid deck only.
Specifications
Designed for commercial and residential applications
Panels can be tapered
An economical mechanically seamed roof panel
2-piece clip allows for unlimited thermal movement
Provides a traditional 5-ply double lock standing-seam
Requires installation over solid substrate
Minimum roof slope: 3:12
4 widths available: 12", 16", 18" and 20"
{/tabs)
Grand Curve Metal Roofing
Description
Engineered for durability and flexibility, Grand Curve handles the
gentle slopes and changing lines of twenty-first century buildings with
ease. Plus two different cap options provide two distinctly different
appearances for maximum curb appeal.
Specifications
Available in G90 Steel, Galvalume with acrylic coating, Aluminum or Copper substrates
Panels can be curved to a 15' minimum radius
UL 90 rated on narrow cap system
1 3/4" or 2" depth
Optional wide batten or narrow cap design
Curved battens/caps to exact dimensions
Clips provide unlimited thermal movement
ASTM E1592 test reports for both wide and narrow batten systems
The Slim Seam panel shall have a coverage of 12" or 16". Seams shall be 1½" high. Roof panels shall use a one-piece roof clip allowing for unlimited thermal movement of the panel system. The panel shall have a factory applied mastic and be seamed by snapping together the integral seam. The panel system shall be as a true standing seam shape requiring no trapezoidal foam closures, plugs, or fillers at eaves.
Specifications
An economical, high-performing standing-seam roof system that's ideal for architectural, commercial and residential applications
Panels can be tapered
Unique stainless steel clip allows unrestricted thermal movement
Installer friendly—snap-together side joint requires no mechanical seaming
Factory formed panels, with factory-applied sealant
Multiple UL ratings for both steel and aluminum substrates
UL Class A fire rated
Usually installed over solid substrate but may be installed over open framing with 3' O.C. maximum spacing
Minimum roof slope: 1:12
Available widths: 12" and 16"
High Seam Metal Roofing
Description
Panels: the High Seam panel shall have a 1½" seam height with a maximum seam width of ¼" and a panel coverage of 12", 14", 16", 18", or 20". Roof panels shall use a one-piece roof clip allowing for thermal movement of the panel system. The panel shall snap lock together without the use or need of an electric seaming machine. Roof panels shall be removable for replacement of damaged materials during and after installation is completed. The panel system shall be as a true standing seam shape requiring no trapezoidal foam closures, plugs, or fillers at eaves. Panels are available smooth or with 1" shadowlines.
UL90 rating for installation over plywood substrate
Optional shadow lines available
Installation over solid substrate is required
Minimum roof slope: 2:12
Standard widths: 16" and 18"
Snap-On-Batten Metal Roofing
Description
The Snap-on-Batten panel shall have a seam height of 1½" and spaced 12", 14", 16", 18", or 20" o.c. The snap on batten cap will be 1½" wide by 1¾" tall. Roof panels shall use a one-piece roof clip allowing for thermal movement of the panel system.
Specifications
Classic bold box batten look
Concealed clip allows for thermal movement
Panels can be tapered
Requires solid substrate for installation
Minimum roof slope: 3:12
4 widths available: 12", 16", 18" and 20"
Snap-On-Seam Metal Roofing
Description
The Snap-on-Seam panels shall have a seams that are 1¾" tall (also available in 1" seam height) and spaced 12", 14", 16", 18", or 20" o.c. The panels are held in place with one-piece, concealed clips that permit thermal movement. A narrow seam cap will then snap over the seam and clips. This panel may be curved with a minimum radius of 5'. The panel seam leg will be shortened to enhance radius capabilities.
Specifications
Ideal for roof applications requiring curved panels
Concealed clip allows for thermal movement
1" Panel can be curved to a minimum radius of 5' 0"
Panels can be tapered
Easily handles roof to fascia transitions
Installation over solid substrate is required
Minimum roof slope: 3:12
4 widths available: 12", 16", 18" and 20"
Stand 'N Seam Metal Roofing
Description
A high-performance, structural standing-seam roof system for the
most demanding applications. Test reports confirm that Stand 'N Seam
has the highest wind uplift resistance of any standing-seam panel
available in the market. Unique one-piece stainless steel clip design does not fold into side joint of panel, allowing unrestricted thermal movement
Specifications
Side joints are double lock-seamed with electric seaming machine ensuring weathertightness
Factory
or field-formed by portable roll-former provides continuous long-length
panels from ridge to eave and eliminates unsightly end-laps. Field
forming available by qualified Fabral operators
Factory applied sealant is standard
ASTM E1592 and Multiple UL90 ratings in both steel and aluminum for applications over open framing or solid substrates
Fully tested performance for air and water infiltration
Multiple UL fire resistant assemblies available and Class A fire rated
Minimum roof slope: 1/2:12
Available widths: 12" and 16"
T-Rib Metal Roofing
Description
Panels: The T-Rib panel shall have a width of 12", 14", 16", or 18" wide. Seams shall be 2½" high with a ½" top flange angled at 90 degrees from the seam to facilitate the seaming of the panel and cap. The panels shall have 1/16" x 1" stiffening ribs in the pan of the panel. Roof panels shall use a one-piece roof clip allowing for thermal movement of the panel system. The panel shall have a factory applied mastic and be mechanically seamed with a field operated electric seaming machine provided by the manufacturer. The panel system shall be as a true standing seam shape requiring no trapezoidal foam closures, plugs, or fillers at eaves. The maximum cap length shall be 30'.
Specifications
A 21/2" high rib panel with excellent design flexibility
Ease of installation for difficult hip, ridge, and valley conditions
Mechanically seamed cap strip with factory- applied weatherstripping assures a weather-tight seam
One-piece concealed clip allows for unlimited thermal movement
Panels can be tapered
Symmetrical design allows panels to be installed in either direction
Multiple UL90 ratings for steel panels
Can be installed over open framing or solid substrate
Minimum roof slope: 1/2:12
Standard widths: 16" and 18"
Posi-Lock Soffit
.032 aluminum and 24 gauge steel are standard
Interlocking design with concealed fasteners allow for fast and economical installation
Available solid or vented (9.2% open area)
Standard lengths: 6'-45'
LP-15 Liner
Perfect for field-assembled projects requiring insulated walls and roofs
Panel legs allow for easy attachment of subgirts
Factory applied sealant in overlapping rib to ensure a weathertight assembly
Standard polyester paint finish
Available perforated for acoustical applications
Thermal and acoustical test reports available
Standard lengths: 6'-45'
Decor Flush Specifications
The Decor-Flush panels shall have one 12" wide raised rib for a total coverage of 12". The 12" rib shall have a depth of 1". At the buyer’s discretion, two minor stiffening ribs shall be centered in the flat of the panel to minimize potential oil-canning. The panels shall have an interlocking sidelap feature which hides the fasteners. Joints may be factory caulked to provide additional weathertightness. Panels shall be attached to the substrate with concealed fasteners
Ideal for soffits, fascias and vertical wall applications
Concealed fasteners for maximum aesthetic value
Factory applied sealant at side joint
Pencil grooves available
Standard lengths: 6'-45'
CFP 6 / CFP 12 Metal Siding
Description
The CFP 6 panels shall have one 6" wide raised rib and 6" wide flush rib for a total coverage of 12". The raised rib shall have a depth of 1 7/16". There shall be one small stiffening bead centered in each rib. The panels shall have an interlocking sidelap feature which hides the fasteners. Panels shall be attached to the substrate with concealed fasteners.
Specifications
Concealed fasteners for maximum aesthetic value
2 stiffening ribs standard
Perfect for walls, fascias and equipment screens
Panel ends can be swedged and endlapped
Available with factory-applied sealant to ensure a weathertight wall assembly
Our Products 
